The IDE To SD (MMC) / MS adapter is an adapter for connecting a SD/MMC memory card to a 2.5" or 3.5" IDE host interface, aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a SD(MMC)/MS card as an IDE hard drive.
SD(MMC)/MS disks offer the benefit of low power consumption, low operating temperature, no acoustic noise, shock resistance, and fast read access time.
The IDE To SD (MMC) / MS adapter is transparent to the operating system and does not require any drivers. With this adaptor, the host PC will identify the inserted SD/MMC card as a standard IDE hard disk. As such, you can install any operating systems and the SD/MMC card will be bootable. In such situation, the SD(MMC)/MS is no hot swappable.
Windows/Linux-based set-top boxes, routers, firewalls
Diskless network clients, Notebook
Any other device requiring rugged solid-state storage
Four PC Card ATA Modes:
- Common Memory Mapped.
- Contiguous I/O Mapped.
- Primary I/O(1Fx) Mapped.
- Secondary I/O(17x) Mapped.
Compatible with all PC Card Services and Socket Service.
Automatic sensing of PC Card ATA or true IDE host interface.
PIO, Multi-word DMA and Ultra DMA host Data transfer support.
Support 8-bit / 16-bit data transfer on host data bus.
Integrated PC Card attribute memory of 256bytes(CIS).
4 PC Card function registers support.
Automatic wake up from power-down on host reset or comand write.
Sector data transfers without microprocessor intervention.
ATAPI Interface (SSF-8020i and SFF-8070i)
Fully compatible with MMC system specification 2.0
Fully compatible with SD Memory Card specification 1.0
Fully compatible with SDHC Memory Card (Tested with 4GB SDHC)
Standard MMC Mode Interface support.
Standard SPI(Serial Programming Interface) Interface(option mode of MMC) for MMC(Multimedia Card) Card.
Fully compatible with Memory Stick Standard specification 1.2.
Support Memory Stick Pro 1-bit / 4-bit data transfer
IDE To SD (MMC) Adaptor x 1
IDE Cable (Optional)